IMINS2考试要点
思科工业网络认证(CCNA Industrial)为需要整合IT和工业网络的制造业、流程控制、原油行业的`管理者、控制系统工程师、传统网络工程师所设计的。CCNA工业网络认证利用当今互联网络环境下所需的最佳实践为候选人提供成功实施和故障排除常见工业标准协议所需具备的技能。
The exam Managing Industrial Networks for Manufacturing with Cisco Technologies (CCNA IMINS2) certification exam (200-601) is a 90 minute, 65 – 75 question assessment. This exam tests concepts and technology commonly found in the automated manufacturing environment. This exam tests candidates on the Common Industrial Protocol (CIP) and ProfiNET industrial protocols and the underlying support network infrastructure design to maximize efficiency within Industrial Ethernet.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
1.0 IP Networking20%
1.1 Describe the difference between enterprise environments and industrial environments
1.2 Describe the components for making the data flow highly available and predictable in an industrial environment (QoS, IP addressing, protocol, and hardware resiliency)
1.3 Interpret and diagnose problems that are related to QoS
1.4 Describe the differences between redundancy and resiliency requirements / approaches between the Enterprise and the plant floor
1.5 Differentiate the capabilities of switch types
1.6 Describe the life cycle of a multicast group
1.7 Describe and configure the operation and use cases for NAT
1.8 Describe and configure the operation and use cases for static routing
1.9 Describe and configure VLAN trunking to a virtual switch
1.10 Describe and configure Layer 2 resiliency protocols (Spanning Tree, REP, Flex Links, and Etherchannels)
1.11 Configure switch ports ( macros, threshold alarms)
2.0 Common Industrial Protocol (CIP) Knowledge and Configuration19%
2.1 Explain the CIP connection establishment process
2.2 Explain producer/consumer models and implicit/explicit message models
2.3 Recognize communication abilities and capacities in different hardware/hardware generations (revisions)
2.4 Identify and describe the technologies that enable CIP Motion and CIP Safety
2.5 Identify the applicability, limitations, and components of a DLR implementation
2.6 Implement multicast features for CIP within a LAN
2.7 Optimize RPI on a CIP connection given a set of parameters
2.8 Enable and configure IEEE 1588 PTP at the system level
2.9 Configure the Stratix using the Add On Profile (AOP) in Studio 5000
3.0 ProfiNET Knowledge and Configuration19%
3.1 Describe the differences in ProfiNET support between Cisco catalyst and Cisco Industrial Ethernet (IE) switches
3.1.a Support for VLAN 0
3.1.b Support for ProfiNET LLDP
3.1.c Support for GSDs (integration into SIMATIC STEP 7)
3.2 Describe the operation and purpose of ProfiSAFE
3.3 Describe the three basic ProfiNET devices and conformanceclasses
3.4 Describe the ProfiNET application classes and communication channels
3.5 Describe DHCP and how it can be used for IP addressing of devices and configuration pushes
3.6 Describe ring network requirements for ProfiNET
3.7 Enable ProfiNET on the switch
3.8 Enable Layer 2 QoS to ensure ProfiNET is prioritized
3.9 Integrate the Cisco Industrial Ethernet Switch in SIMATIC STEP 7
3.10 Configure and monitor ProfiNET alarm profiles on IE switches
4.0 Security12%
4.1 Describe the defense in-depth approach to securing the industrial zone
4.2 Identify how a security component (hardware/software) applies to a network device to meet the network security definition of defense in depth
4.3 Describe network device hardening
4.4 Describe the concept and mechanisms of implementing logical segmentation
4.5 Identify possible options to control traffic between zones (ACLs, firewalls, VLANs)
5.0 Provide End User Support10%
5.1 Describe the differences between 802.11a/b/g/n/ac
5.2 Describe the components that you need to build multiple wireless networks on a single access point
5.3 Describe the difference between autonomous and controller-based access points and wireless workgroup bridges
5.4 Demonstrate a typical switchport configuration for autonomous and controller-based access points
5.5 Describe the limitations of using a workgroup bridge with a control communication
6.0 Troubleshooting20%
6.1 Troubleshoot advanced Layer 1 problems such as mechanical deterioration, electromagnetic noise issues, and infrastructure mismatches
6.2 Troubleshoot VLAN trunking
6.3 Troubleshoot an error disabled port
6.4 Troubleshoot basic spanning tree port state and root priority problems
6.5 Troubleshoot Layer 3 problems by inspecting route tables and NAT tables
6.6 Troubleshoot Layer 3 problems in a VRF-lite enabled environment
6.7 Demonstrate the ability to find the location of a device within a multi-switch network given an IP address
6.8 Identify methods for troubleshooting a communication problem in a CIP environment
6.9 Troubleshoot CIP using an Ethernet/IP browse tool, command line, and a web browser
6.10 Troubleshoot device communications performance
6.11 Identify the source of cable and device faults in a DLR
6.12 Identify methods for troubleshooting a communication problem in a ProfiNET environment
6.13 Troubleshoot ProfiNET using SIMATIC STEP 7 to view network topology, use the switch command line
-
思科路由器设置VPDN的方法
CCNA重新认证:CCNA认证证书的时效性是三年。要重新更新证书,必须通过CCNA的考试(如果通过的下一阶段CCNP的考试,CCNA认证证书会被自动更新)下面是小编整理的关于思科路由器设置VPDN的.方法,欢迎大家参考!1启用aaanew-modelaaanew-model2、建立认证方式aaaauthentic...
-
思科认证课程介绍
培训期限:建议自学时间1个月,培训机构6天基本可以讲完。:建议自学时间2个月,培训机构20天基本解决。:建议学习半年。CCNACCNA认证介绍——思科认证网络支持工程师思科认证网络支持工程师认证证书说明了你拥有足够的网络知识去提供服务给中小型企业。作为C...
-
思科电信运营商核心网络运营基础考试大纲
思科电信运营商核心网络运营基础(OFCN)考试是与CCNPSP运营认证相关的.考试。该考试主要检验考生在电信运营商网络运营环境方面的知识,重点关注与第二层和第三层网络运营有关的中-高级流程管理、NMS工具和故障排除技能。ExamDescriptionThe642-770OperationalFou...
-
思科认证CCIE路由和交换笔试大纲
TheCCIEwrittenexamisatwo-hourqualificationexam.Theexamusesacombinationof90-110multiplechoicequestionsandsimulationstoassessskills.Examsareclosedbookandnoreferencematerialsareallowed.Thefollowingtopicsaregeneralguidelinesforthecontentlikelyt...
相关文章
- The spring is in my mind英语作文
- 初二下册英语期中Feelings and impressions的考试复习知识
- 英语作文:Climbing mountains
- 关于初一上册英语期中考试知识点unit1Myname’sGina
- 英语教材分析:composition,analysis (unit 2)
- 华为HCNP-OTN Transmission认证考试大纲
- 华为HCIE-Transmission认证考试大纲
- 关于Unit26 Mainly revision的教学设计
- 华为HCNP-MSTP Transmission认证考试主要内容
- 七年级上册英语复习要点:Unit2 This is my sister