2017设计思科无线企业网络考试主要内容
WIDESIGN(300-360)考试检验考生是否具备识别客户和应用需求,实施预测无线设计原则和执行站点调查所需的企业无线网络设计和优化的.能力。下面是考试的主要内容:
1.0 Obtaining Customer Requirements as Related to the WLAN Installation12%Hide Details
1.1 Identify business and RF application needs
1.2 Identify client density, capabilities and their impact on the wireless network
1.2.a Client quantity, radio type, spatial streams
1.3 Identify the challenges of setting up a wireless network by various vertical markets
1.4 Describe required site survey documentation
1.4.a Customer questionnaire
1.4.b Floor plans & their quality
1.4.c Describe the deliverables of the site survey
1.5 Identify coverage area requirements
1.5.a Mesh
1.5.b High density
1.5.c Security sensitive
1.5.d Real time applications
2.0 Determine Facility Type and Constraints Related to WLAN Deployments12%Hide Details
2.1 Describe impact of regulatory domains
2.1.a Mesh
2.1.b Channel and power
2.1.c Multi-national deployments
2.2 Identify deployment location safety considerations
2.3 Identify the impact of customer aesthetic limitations on the installation
2.4 Assess the existing wired and wireless infrastructure
2.4.a Determine high-throughput and very high throughput (VHT) protocol (n/ac) impact
2.4.b Determine existing wireless infrastructure if required
2.5 Identify impact of material attenuation
2.5.a Walls, cubicles, and the likes
2.5.b Single/multi-floor
2.5.c Campus
2.5.d Warehouse/retail
2.5.e Subtitle number 2.2
3.0 WLAN Predictive Design14%Hide Details
3.1 Select the criteria used for coverage design
3.1.a Data vs voice vs video vs location
3.2 Demonstrate the impact of frequency planning in a high density environment
3.2.a Band select for high density
3.2.b Optimize 2.4 GHz radio utilization
3.2.c Legacy devices
3.2.d Channel width
3.3 Use PI and Ekahau planning tools to make network plan
3.3.a Enter network requirements in the tool
3.3.a.[i] Capacity requirements
3.3.a.[ii] Coverage requirements
3.3.b Define the environment
3.3.b.[i] Maps and scale
3.3.b.[ii] Types of RF obstacles
3.3.c Place and configure simulated APs and antennas
3.3.c.[i] Place simulated APs (manual, automatics)
3.3.c.[ii] Adjust APs and Antennas / AP TX power height and down tilt
3.3.d Analyze key network metrics using heat maps for 2.4 and 5GHz
3.3.d.[i] Analyze coverage, SNR, and channel overlap
3.3.d.[ii] Analyze AP placements in regards to real time handoffs around corner
4.0 Pre-Deployment Site Survey14%Hide Details
4.1 Identify the appropriate site survey equipment and access requirements based on environmental needs
4.2 Complete the Layer 2 site survey for indoor, and outdoor MESH environments
4.2.a Select proper AP and antenna for conducting site survey
4.2.b Configure AP
4.2.c Survey for worst case client
4.3 Complete Layer 1 survey (Cisco CleanAir, Metageek Chanalyzer)
5.0 Post-Deployment Site Survey15%Hide Details
5.1 Verify RF coverage
5.1.a Utilize tools (Ekahau) for audit
5.1.b RRM, controller
5.1.c Analyze SNR, channel overlap, and packet loss
5.2 Verify network applications and performance
5.2.a Apply PI tools (voice readiness, location readiness, site calibration)
5.3 Reconcile any deployment issues
5.4 Assemble and deliver installation report to customer
5.4.a Indoor
5.4.b Outdoor MESH
6.0 Design the Infrastructure of the Wireless Network15%Hide Details
6.1 Determine physical infrastructure requirements
6.1.a AC Power and POE
6.1.b Understand cable plant considerations
6.1.c Mounting considerations: NEMA
6.1.d Outdoor grounding and lighting protection
6.1.e Rack capacity
6.1.f Switch port capacity
6.2 Determine logical infrastructure requirements
6.2.a Determine AP count, controller count, and license requirements
6.2.b Decide the type of architecture for the deployment
6.3 Describe IPv6 optimization on the WLC
6.3.a RA filter
6.3.b DHCP Server guard
6.3.c DHCPv6 Source guard
7.0 Describe and Design Wireless Architecture for Real time Applications18%Hide Details
7.1 Describe the relationship between real time applications & the wireless networks
7.1.a Packet Error Rate (PER)
7.1.b RF Coverage
7.1.c Bit Error Rate (BER)
7.1.d QoS
7.1.e Call Admission Control (CAC)
7.1.f Client roaming decision algorithm
7.2 Describe voice and video as they apply to the wireless network
7.2.a Device capabilities (hardware and software)
7.2.b Call setup/data flow overview
7.2.c Other wireless voice and video services (i.e. Jabber, Lync, Skype, Viber, Facetime)
7.2.d Standards and WIFI Alliance (WFA) certifications (.11r, .11e, .11n/ac, .11k, CCKM, voice enterprise, voice personal, WMM, UAPSD)
7.2.e Cisco Compatible Extensions (voice features)
7.2.f Voice and video codecs
7.2.g Skinny Client Control Protocol (SCCP)
7.2.h Session Initiation Protocol (SIP)
7.3 Describe real time applications (other than voice and video) as they apply to the wireless network
7.3.a Session based and non-session based
7.3.b Roaming sensitivity
7.3.c Disconnection issue
7.4 Design wireless roaming parameters for supporting real time applications
7.4.a 802.11 r/k, CCKM, OKC, mobility groups, interface groups,
7.4.b Tuning RF parameters
7.4.c AP placement considerations
7.5 Design wireless parameters for supporting real time applications
7.5.a Minimum speed requirements-RSSI and SNR
7.5.b Client transmit and receive sensitivity / mismatch with AP
7.5.c Cell overlap requirements
7.5.d Cell separations
7.5.e Traffic control and management, QoS, VLAN, WMM, AVC
7.5.f Delay and jitter requirements
7.5.g CAC and TSPEC
7.5.h Spectrum
7.5.i 802.11n/ac enhancements
7.5.j Concurrent client connections
7.5.k Band select
-
虚拟局域网(VLAN)路由设置
虚拟网络技术打破了地理环境的制约,在不改动网络物理连接的情况下可以任意将工作站在工作组或子网之间移动,工作站组成逻辑工作组或虚拟子网,提高信息系统的运作性能,均衡网络数据流量,合理利用硬件及信息资源。下面小编准备了关于虚拟局域网(VLAN)路由设置的.文章,...
-
思科认证无线路由密码设置方法
思科无线路由密码怎么设置?本文以TP-Link无线路由为例,其他无线路由密码设置其相似,路由器部分设置无线路由密码:(路由器地址及访问密码只提供默认值请自行替换自己设置的值)。◆打开浏览器在地址栏输入回车弹出设置无线路由密码提示窗。◆在密码提示窗输入用户名...
-
思科路由器路由协议设置
思科(Cisco)提供了业界范围最广、灵活性最高的安全、高性能接入路由器、集成多业务路由器和汇聚路由器,可为最广泛的机构部署种类丰富的服务,其范围从家庭办公机构、小型办公机构直到大型企业的分支机构和总部。下面小编准备了关于思科路由器路由协议设置的文章,...
-
思科CCNA认证网络工程师学习指南
思科公司是全球领先的互联网设备供应商。提供业界范围最广的网络硬件、互联网操作系统(IOS)、网络设计和实施等专业技术支持,还提供全球最权威的网络解决方案。yjbys小编整理了一些思科CCNA认证网络工程师学习指南分享如下:一、书籍简介《思科CCNA认证详解与实验...