WIFUND实施思科无线网络基础考试要点
200-355 WIFUND 实施思科无线网络基础考试时间为90分钟,涵盖与CCNA无线认证相关的60-70道考题。200-355 WIFUND考试检验考生Radio Frequency(PF)及802.11等知识点,同时检测考生是否具备安装,配置,监控及基础故障排除小型企业的无线网络的'能力。
下面的信息提供了实施思科无线网络基础考试的大纲。然而,在具体的考试中还可能出现其他的相关题目。
1.0 RF Fundamentals13%
1.1 Describe the propagation of radio waves
1.1.a Frequency, amplitude, phase, wavelength (characteristics)
1.1.b Absorption, reflection, diffraction, scattering, refraction, fading, free space path loss, multipath
1.2 Interpret RF signal measurements
1.2.a Signal strength (RSSI, Transmit power, receive sensitivity)
1.2.b Differentiate interference vs. noise
1.2.c Device capabilities (smartphones, laptops, tablets)
1.2.d Define SNR
1.3 Explain the principles of RF mathematics
1.3.a Compute dBm, mW, Law of 3s and 10s,
1.4 Describe Wi-Fi antenna characteristics
1.4.a Ability to read a radiation pattern chart
1.4.b Antenna types and uses
1.4.c dBi, dBd, EIRP
2.0 802.11 Technology Fundamentals13%
2.1 Describe basic Wi-Fi governance
2.1.a Describe regional regulatory bodies (such as, FCC / ETSI/ NTT)
2.1.b IEEE 802.11
2.1.c Wi-Fi Alliance
2.2 Describe usable channel and power combination
2.2.a Regional EIRP limitation examples
2.2.b ISM, UNII frequency bands
2.2.c Describe RRM fundamental(s)
2.3 Describe 802.11 fundamentals
2.3.a Modulation techniques
2.3.b Channel width
2.3.c MIMO / MU-MIMO
2.3.c (i) MRC
2.3.c (ii) Beam forming
2.3.c (iii) Spatial streams
2.3.d Wireless topologies
2.3.d (i) IBSS
2.3.d (ii) BSS
2.3.d (iii) ESS
2.3.e Frame types
2.3.e (i) Management
2.3.e (ii) Control
2.3.e (iii) Data
3.0 Implementing a Wireless Network16%
3.1 Describe the various Cisco wireless architectures
3.1.a Cloud
3.1.b Autonomous
3.1.c Split MAC
3.1.c (i) FlexConnect
3.1.c (ii) Centralized
3.1.c (iii) Converged
3.2 Describe physical infrastructure connections
3.2.a Wired infrastructures (AP, WLC, access/trunk ports, LAG)
3.3 Describe AP and WLC management access connections
3.3.a Management connections (Telnet, SSH, HTTP, HTTPS, console)
3.3.b IP addressing: IPv4 / IPv6
3.3.c Management via wireless
4.0 Operating a Wireless Network20%
4.1 Execute initial setup procedures Cisco wireless infrastructures
4.1.a Cloud
4.1.b Converged
4.1.c Centralized
4.1.d Autonomous
4.2 Describe the Cisco implementation of the CAPWAP discovery and join process
4.2.a DHCP
4.2.b DNS
4.2.c Master-controller
4.2.d Primary-secondary-tertiary
4.3 Distinguish different lightweight AP modes
4.4 Describe and configure the components of a wireless LAN access for client connectivity using GUI only
4.5 Identify wireless network and client management and configuration platform options
4.5.a Controller GUI and CLI
4.5.b Prime infrastructure
4.5.c Dashboard
4.5.d ISE
4.6 Maintain wireless network
4.6.a Perform controller configuration backups
4.6.b Perform code updates on controller, APs, and converged access switches
4.6.b (i) AireOS: boot loader (FUS), image
4.6.b (ii) IOS-XE: bundle, unbundle
4.6.b (iii) Autonomous
5.0 Configuration of Client Connectivity16%
5.1 Identify authentication mechanisms
5.1.a LDAP, RADIUS, local authentication, WebAuth, 802.1X,PSK
5.2 Configuring WLAN authentication mechanisms on the controller
5.2.a WebAuth, 802.1X, PSK
5.2.b TKIP deprecation
5.3 Configure client connectivity in different operating systems
5.3.a Android, MacOS, iOS, Windows
5.4 Describe roaming
5.4.a Layer 2 and Layer 3
5.4.b Intracontroller and intercontroller
5.4.c Centralized mobility
5.4.d Converged mobility
5.5 Describe wireless guest networking
5.5.a Anchor controller
5.5.b Foreign controller
6.0 Performing Client Connectivity Troubleshooting13%
6.1 Validating WLAN configuration settings at the infrastructure side
6.1.a Security settings
6.1.b SSID settings
6.2 Validating AP infrastructure settings
6.2.a Port level configuration
6.2.b Power source
6.2.c AP and antenna orientation and position
6.3 Validate client settings
6.3.a SSID
6.3.b Security
6.3.c Device driver version
6.4 Employ appropriate controller tools to assist troubleshooting
6.4.a GUI logs
6.4.b CLI show commands
6.4.c Monitor pages
6.4.c (i) CleanAir (controller GUI)
6.2 Identify appropriate third-party tools to assist troubleshooting
6.2.a OS-based Client utilities
6.2.b Wi-Fi scanners
6.2.c RF mapping tool
7.0 Site Survey Process9%
7.1 Describe site survey methodologies and their purpose
7.1.a Offsite (predictive / plan)
7.1.b Onsite
7.1.b (i) Predeployment (AP on a stick)
7.1.b (ii) Post deployment (validation)
7.2 Describe passive and active site surveys
7.3 Identify proper application of site survey tools
7.3.a Spectrum analyzer
7.3.b Site surveying software
7.4 Describe the requirements of client real-time and non-real-time applications
-
保护思科无线企业网络考试要点
保护思科无线企业网络(300-375)是获得思科CCNP认证需要通过的`一项考试。考试时间为90分钟,包括60-70道考题。WISECURE(300-375)考试证明通过的考生具备实施客户端设备安全,基于身份认证和服务,以及保护和监控企业无线基础设施。以下是保护思科无线企业网络(300-3...
-
思科认证CCIE路由和交换实验考试大纲
ExamDescription:TheCCIE®RoutingandSwitchingLabExamversion5.0isaneight-hour,hands-onexamwhichrequiresyoutoconfigureandtroubleshootaseriesofcomplexnetworkstogivenspecifications.Knowledgeoftroubleshootingisanimportantskillandcandidatesaree...
-
在Cisco IOS中配置IPv6防火墙案例教程
随着IPv4地址的枯竭,IPv4地址将成为历史,取而代之的将是IPv6地址。我发现很多企业的'网管在向IPv6迁移的问题上都显得犹豫不决,可能是觉得这是个全新的领域,迁移起来会很麻烦。但实际工作,比如防火墙服务的调整,并没有大家想象的那么难。CiscoIOS可以支持多种防火墙...
-
思科无线路由器的详细设置方法
Cisco851W路由器是一个相对廉价的多功能设备,最低价格292美元,支持防火墙隔离的虚拟无线局域网。虽然Cisco871W可做更多事情,但它的价格在500到700美元之间,价格依据软件功能不同而变化—。这价格对于一个家用路由器或小型企业用的路由器来说过于昂贵了。就算...